740410 - LID SWITCH ASSEMBLY WITH 5' OF WIRE

740410 - LID SWITCH ASSEMBLY WITH 5' OF WIRE
Click To Enlarge
  • Item #: 740410

740410 - LID SWITCH ASSEMBLY WITH 5' OF WIRE - The purpose of the lid safety switch assembly is to shut off the chamber controls when the cover is not closed. The lid safety switch assembly is made up of three components: the switch, the actuator, and the connector. The switch is fastened to the hinge-mounting bracket that is welded to the chamber. The actuator is fastened to the cover swivel bracket that moves when the cover is opened. The connector supplies voltage to the switch from the electrical panel. When the cover is opened, the actuator moves away from the switch creating an OPEN condition that shuts off the chamber controls, heaters and solenoids. When the cover is closed, the actuator moves toward the switch creating a CLOSED condition allowing the chamber controls to operate. After closing the cover, push the ON button to reactivate the controls, and restart the chamber. Works with all Harshaw, Engelhard, Atotech USA, Atlas and Auto Technology Company fog and cyclic corrosion test chambers.

  * Marked fields are required.
Qty*
Price $82.75